IMPORTANT! This procedure is no longer the currently supported. Please see the new recommended method for writing Compact Flash boot cards for Syneto UTM. WARNING: If you use this method to install Syneto UTM 1.3.0 or later, the image will not be able to boot! If you want to use...

Syneto makes available to its users a couple of tools used to test internet browsing. These tools will allow the administrator to better asses if a Syneto UTM web proxy installation functions normally and within acceptable performance. These tools are available for download by logging in to...

The simplest method to migrate to Syneto from Legacy is to install the latest Syneto firmware on the flash disk and load the Legacy configuration. If this is not possible the folowing crossgrade/upgrade procedure may be used. The Syneto firmware shares multiple similarities with the Legacy,...

Syneto UTM is able to run your custom startup scripts that get executed immediately after the normal startup sequence finishes. Using those scripts you are able to configure certain aspects of the Syneto UTM that are not configurable from the current web interface or using the config command. ...

We have a HTTP web server inside our internal network and we want to make it accessible to the world on our fresh bought domain www.example.com which points to our router IP address. We also have an internal network, SNAT-ed with the router public IP address when packets leave the router via the...

This tools is used to rearrange the order of the logical interfaces (ethN) to match the order of the physical ports of the machine. Solution: WARNING: this requires to take offline your machine and to reset your configuration. NOTE: You can abort at any time if you press CTRL...

 The task of defining and then enabling DNS domains in the SMTP proxy's configuration can be a tedious job when you have over 10 domains to insert/enable. That's why we come to rescue with a script that will automatically define and enable the domains passed in a text file, one per line. The...

 The verify peer feature is checking for the existence of a user on a designated mail server. Most of the time, those servers are not configured to respond with an error when the client party issues RCPT TO command for a non-existent user - with the purpose of preventing dictionary attacks....

Introduction Until Syneto 1.3.0 was released, installation of CF cards was recommended to be done using a Linux distribution. Since following each distribution creates a maintenance potential problems often not foreseeable, we decided to release the 1.3.0 UTM installation ISO's that may be used...